Special Offer 799.95€
Price Includes VAT & Delivery*
Meter Controlled Water Softener
Once installed and set up our water softener automatically performs a regeneration and supplies the entire property with softened water. It has the added benefit of being able to use either Block, Tablet or Granular water softener salt however we do recommend the use of tablet salt with this unit.
WHY THIS IS THE ONE TO BUY?
The Culligan Water Genie is designed with efficiency in mind. At the heart of the water softener is the intelligent meter system that not only monitors your water consumption, but learns from it on a daily basis.
As well as being more accurate than most machines when deciding whether or not to do a regeneration, it also uses a proportional brining system to regenerate: Where most Softeners only have the capacity to perform a full regeneration, the Culligan Water Genie will make an allowance for any unused capacity and perform a shorter regeneration using less salt and less water.
Another intelligent feature on this softener is its ability to perform mini regenerations: resin is more efficient at removing hardness from water when it is fresh from a regeneration. By constantly monitoring your water usage this softener will perform mini (top up) regenerations in order to keep the resin as efficient as possible.
The protocol used in the system design is based on the extensive experience in the UK. The easy to follow programming that allows different hardness settings to be stored, together with its intelligent meter and regeneration system, makes this a very efficient machine.
Other features on this softener:
The machine is supplied with a hardness test kit for easy programming
It uses a rotary valve meaning less moving parts for greater reliability.
Flow rates suitable for use on conventional and modern plumbing systems.
Custom back lit easy read display.
Memory back-up facility allows the controller to restore all key settings held in its memory after a temporary power supply failure, (for up to 72 hours).
Low voltage control system.
High capacity resin for generous amounts of softened water between regenerations. Proportional Brine Draw means the Softener uses the minimum amount of salt each regeneration dependant on the remaining capacity.
All EMWC Water Softeners have a 5-year guarantee -at no extra cost! Because of its proven reliability, your EMWC water softener will have a five-year parts and one year labour guarantee. This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.
MADE IN ENGLAND
The water softener is manufactured in the UK and is therefore designed specifically for the UK market and for the UK domestic water system. It also means that we, unlike other companies, "wet test” the softeners before they leave the factory, so you can rest assured that the softener firstly works but more importantly it doesn't leak.
Installing your Water softener - plumber or DIY? Every water softener comes complete with , fitting instructions and an option of an installation kit allowing for installation by a plumber or DIY enthusiast.
Valve: Meter Connections Inlet/Outlet 3/4" Bsp male parallel
Overflow 1/2" Hose connector
Drain 3/8" O.D tubing Operating Parameters
Max operating Pressure 6 bar (72.5 p.s.i )
Min Operating Pressure 1.7 bar (25 p.s.i )
Max water temperature 49 degree C
Min water temperature Protect from freezing.
Volume & Weight
Softener Resin volume 1x 10 litres
Salt Storage capacity 15Kg tablet salt
Operating Data 2400Ltr per cycle
Capacity per regen at 300ppm hardness
0.84KG Max Salt used per Full regeneration
50 litres / min peak flow at 2 bar pressure drop 30 litres / min Rated service flow at 1 bar pressure drop
80 litres Max Water used per Full Regeneration
1.9 1/ min Maximum flow rate to drain
59 Minutes Maximum Regeneration Time < 1mg per litre Softened water hardness
Pressurised Systems (Mega Flo) = 22mm Kit
Combination Boilers = Combi Kit
Standard Fittings (most Homes = 15 mm Kit select an alternative Installation Kit (if required) from the Checkout
All prices include VAT and Delivery to Mainland Europe & Ireland colour of cabinets may vary
* Postage & Package of €35.00 & 2% Administration & bank charges included in the price.